Blastoise~master
Water Trainer
These are my first sprites. they are some new eveelutions. mayebe some constructive critisizm.
-
Be sure to join the discussion on our discord at: Discord.gg/serebii
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
First sprites
- Thread starter Blastoise~master
- Start date
Umbreon Rider
Tolkien fan 4 eva
AHHHH JPG BERNS MY EYES!
Those are fusions, not 'new eeveelutions' mixer with ummbreon espeon, haunter spinda, and some others. They are also very copy pasty, as well as the first ones head being badly coloured.
OVR=4/10
Those are fusions, not 'new eeveelutions' mixer with ummbreon espeon, haunter spinda, and some others. They are also very copy pasty, as well as the first ones head being badly coloured.
OVR=4/10
~Lucario Master~
Well-Known Member
Usually Fakemon are made from scratch, as you start with nothing. These are edits, and choppy edits of Umbreon and Espeon. But, to humor you, I'll break it down piece by piece
Overall, these are JPG's, and sprites need to be PNG to retain their clearness.
The Rock one has bad shading in my opinion. It has a Pasted Onix Tail, which the rocky look of it doesn't blend with the smoothness of the Umbreon Sprite.
Once again, Steel One = Shading Problems. And to boot, most of the parts don't even belong there, Horribly recolored Pinser Horns and and by the way it looks, a Bayleaf leaf.
The Flying one is beyond strange, as it contains so many parts from other Pokemon, that I had to look at it twice to see. The Feet are all the same, bad choice on your part.
the Ghost one is atcually pretty good, but still an edit. Besides the incline on the Haunter like tail, its pretty good. Nice smoke effects
Thought I'd post it again.
Overall, these are JPG's, and sprites need to be PNG to retain their clearness.
The Rock one has bad shading in my opinion. It has a Pasted Onix Tail, which the rocky look of it doesn't blend with the smoothness of the Umbreon Sprite.
Once again, Steel One = Shading Problems. And to boot, most of the parts don't even belong there, Horribly recolored Pinser Horns and and by the way it looks, a Bayleaf leaf.
The Flying one is beyond strange, as it contains so many parts from other Pokemon, that I had to look at it twice to see. The Feet are all the same, bad choice on your part.
the Ghost one is atcually pretty good, but still an edit. Besides the incline on the Haunter like tail, its pretty good. Nice smoke effects
Thought I'd post it again.
Belgian Pokemaster
Well-Known Member
In my opinion,they look JPEG,too less shading,and copy-pastish
Umbreon Rider
Tolkien fan 4 eva
that is because they are jpg, copy pastish, and badly shaded my friend.In my opinion,they look JPEG,too less shading,and copy-pastish
Take care of those problems blastoise, and you might make a good splice edit.
remember PNG stands for PwNaGe.
~Lucario Master~
Well-Known Member
Steel's head was wrong shaded.
I'm seriously convinced your f*cking retarded. Nearly everyone has posted that they are shaded, not just the steel one. Provide some real crit